Foam Core Board

Using foam core boards as art supplies

admin — Sun, 28 Dec 2008 14:38:28 +0000

When thinking about the mat you wish to use, you will also be thinking how to proceed and not cut off too much of the image from view. Purchasing photo framing supplies from online stores can be very challenging , the precut foam core board is perfectly acceptable, and tends to be just suitable. If you wish to build your own from one-eighth of an inch to three sixteenths of an inch in width you’re going to be facing some harsh times.

Doing a great job of photo framing begins with a pre cut mat foam core board, glass or acrylic glazing and a mount board. Each of the photo framing supplies is displayed in a classy manner or whether it is or isn’t for the whole world to see.

When framing artwork the mat that you will need should be a mat wide enough to cover the corners, yet an appropriate width so to separate components, so that if you wish to frame your best choice you’ll be able to do so. Foam board is available in acid free varieties, which is wonderful if you’re serious about photo framing with foam core boards. For the artwork you have a photograph or other piece of artwork that is uniquely sized, then a custom mat foam core board will on which your photos will reside.

Nice photo framing requires some skill on the side of the person performing it. This means the quality of the photo frame depends on the materials you’ll be using. Thus, using only quality foam core board art materials is a must.

If you’re not into creating your own foam core art board you should know that you can find custom made ones at affordable prices, although there’s a bit of hassle waiting for you in there as well. Finding just the perfect one isn’t as easy as it may seem.

The appropriate photo framing supplies will make all the differences when it comes to your beautiful photos or artwork.

Black foam core board

admin — Sun, 07 Dec 2008 02:08:10 +0000

Black foam core boards are often used for photography or different art paintings. Another activity in which black foam boards are good is for crafting projects. Typically, there aren’t many suppliers that can sell black foam boards at reasonable prices and quantities, but rather try to sell them at over price and only in large quantities. Black foam board panels aren’t very cheap, thus not anyone can afford them; this article’s here to show you how to build your own black foam core board for a fraction of the actual cost.

A way to make black foam core boards at home is to simply purchase any type of foam core boards you can get yours hands on, may they be styrofoams or blown urethane. The way you would want to go about this would be to purchase some cheap latex paint - any color will do - and simply paint the foam board using a roller. After you’re done painting your foam board, you can glue them together using some silicone sealant.

Black foam core boards are good for virtually any type of mounting - including floating art in dimensional framing.

If you’ve got any other questions related to black foam core, don’t hesitate to use our contact form.

Foam core cutter

admin — Sat, 06 Dec 2008 18:22:58 +0000

One of the reasons why foam cutting is almost an art is because foam core boards are hard to cut, their foam core structure makes it this hard. Usually, using a foam core cutter is ideal, the only problem that occurs is where to find such a tool. A foam core cutter is usually made out of cutting blade and a piece of wood, or more commonly found foam core cutters are made out of a plastic holder and a cutting blade.

The purpose of this article is to illustrate how a foam core cutter can be made using a simple piece of wood, a Swann-Morton 10A blade and three brass pins.

For this homemade foam core cutter a piece of wood with the dimensions of 19mm x19mm x130mm was used, but you should note that this isn’t really the most important part of the foam core cutter but the positioning of the blade is. An ideal foam core cutter cuts in such a way that only the lower layer of paper will be left untouched.

How to build a cheap foam core cutter

1. Purchase a piece of wood, a Swann-Morton 10A blade and some brass pins.

2. Start by positioning the blade on the wood and inserting the lower brass pin in such a way that the blade will be held in place and can’t be removed in any way.

3. Measure the angle and position the blade with two more brass pins in such a way that the blade is properly held in place; only the upper part can pass through the brass pin.

4. In the above picture, the piece of paper you see under the cutting blade has the same height as a default foam core board and it was placed in such a way that only the lower paper layer will be left untouched. For a proper placement of the blade, I recommend you do the same thing.

If you have any questions regarding foam core cutting, don’t hesitate to use our contact form and contact us.

If you have anything else to add to our foam core cutter tutorial, please do.